6 min read
nSuns LP: When to Run It and When to Run From It
nSuns is a high-volume 5/3/1 variant that pushes main-lift work nearly every session. Who benefits, who breaks, and how to tell which side you are on.
Tag
programming
40 articles
7 min read
Madcow vs Starting Strength: The Graduation Question
Starting Strength gets you to a novice plateau. Madcow 5×5 is a classic next step. When to switch, and when Madcow is the wrong choice for where you are.
7 min read
Texas Method Explained: Heavy, Light, Medium in Practice
Rippetoe's classic intermediate program: a volume day, a recovery day, and an intensity day. What the heavy-light-medium structure actually buys you.
8 min read
Which 5/3/1 Template Fits Your Phase
Jim Wendler wrote dozens of 5/3/1 templates. A decision guide for Boring But Big, FSL, BBS, Jack Shit, 5/3/1 for Powerlifting, and how to pick the right one.
7 min read
Who Should Actually Run Conjugate?
Westside Conjugate produced world-class powerlifters for decades. It also ruined many intermediates who ran it too soon. An honest answer on who belongs on it.
7 min read
Nutrition for Strength: Calories, Protein, and the Rest You Can Ignore
Strength nutrition is mostly calories and protein. What the research says about the two numbers that matter and the details most lifters spend too much time on.
7 min read
Training Plateaus: The Five Causes and How to Diagnose Them
Most plateaus are not programming problems. A framework for diagnosing whether the stall is recovery, volume, technique, nutrition, or simply the wrong program.
7 min read
Training for Older Lifters: What Changes at 40, 50, and Beyond
Older lifters need fewer heavy singles and more attention to recovery. What adjusts with age and what stays the same across 40+ training.
7 min read
Training With Limited Equipment: Dumbbells, Bands, and One Bar
A minimal home gym can still drive strength gains. How to program around a single barbell, dumbbells, or bodyweight-plus-bands setups.
6 min read
Travel Training: Keeping Strength on the Road
Travel weeks do not have to mean lost progress. A framework for hotel gyms, conference weeks, and the trips where lifting takes a back seat.
7 min read
Women's Strength Programming: What Actually Differs (And What Does Not)
Most strength programming for women is identical to men's programming. Where sex differences show up in the research — and where they do not.
7 min read
Strongman for Beginners: Implements, Programming, and Your First Events
Strongman training has a low entry bar and a steep learning curve on implements. How to start without wasting months on movements you will not compete in.
6 min read
When to Change Programs: Signals That It Is Time (And When It Is Not)
Program-hopping kills progress. Staying on a stalled program also kills progress. The signals that separate a real stall from impatience.
5 min read
Sheiko #29 Explained
What makes Sheiko #29 work, who it is actually for, and what to expect in your first four weeks of Boris Sheiko's high-frequency powerlifting system.
5 min read
How Smolov Jr. Works (And When to Use It)
Smolov Jr. is a three-week peaking block that reliably adds 10–30 lb to a lift. Here is the mechanics behind it and when it actually makes sense to run.
6 min read
How SBS Reps-to-Failure Autoregulation Works
SBS Reps-to-Failure adjusts loads based on your actual performance. Here is how the feedback loop works and why it beats fixed-percentage programming.
5 min read
The Bulgarian Method: What Most Lifters Get Wrong
The Bulgarian method is famous for daily maxes and brutal workloads. The useful lessons for regular lifters are not the ones usually copied.
5 min read
PHUL vs PPL: Which Split Fits Your Schedule?
PHUL and PPL both build size and strength on four-to-six day weeks. The difference is how each split groups lifts and how forgiving each is under real life.
6 min read
MEV, MAV, MRV: Volume Landmarks in Practice
Volume landmarks are useful when applied with honesty. Here is how to find your own MEV, MAV, and MRV — and where the framework tends to break down.
5 min read
How to Substitute Exercises Without Breaking Your Program
Every program calls for equipment you lack or movements you cannot do. How to swap exercises without wrecking the stimulus the program was built around.
6 min read
The Juggernaut Method Explained
Chad Wesley Smith's Juggernaut Method uses block periodization across four waves. Here is how the 10s, 8s, 5s, and 3s cycles actually fit together.
5 min read
Greyskull LP Explained
Greyskull LP pairs beginner strength gains with built-in arm work. How the AMRAP set, A/B rotation, and accessories fit together without losing focus.
6 min read
Daily Undulating Periodization: A Practical Guide
Daily Undulating Periodization (DUP) rotates rep ranges within a week instead of across months. Here is how to set one up and what the research actually says.
6 min read
The Coan-Phillipi Deadlift Routine, Explained
Ed Coan wrote a 10-week deadlift peaking program for Mark Phillipi. Here is how the heavy singles and backoff volume actually build a meet PR.
6 min read
The Doug Hepburn Method, Explained
Doug Hepburn trained with heavy singles decades before modern strength theory caught up. The method still holds up. Here is how to run it.
5 min read
How to Deload: Planned, Reactive, and Taper Frameworks
Most lifters either never deload or do it by accident. Three frameworks for deloading on purpose, and when to use each.
6 min read
Strongman for Powerlifters: What Transfers, What Does Not
Strongman training builds different strength than powerlifting. What carryover to expect, what costs you pay, and how to blend both without losing either.
7 min read
Hypertrophy for Strength: When More Muscle Moves More Weight
Muscle mass sets the strength ceiling. How to run a hypertrophy block that converts into bigger squats, benches, and deadlifts — not a bigger mirror.
8 min read
Meet Day Execution: Warm-Ups, Attempts, and the Small Decisions That Decide a Meet
A meet is won or lost between weigh-in and last deadlift. Warm-up timing, attempt selection, fueling, and the small decisions across nine lifts.
7 min read
Training Through Injury: When to Push, When to Pivot, When to Stop
Most training injuries do not require time off — they require changed loading. A framework for what to modify, what to substitute, and what to pause.
6 min read
Kettlebells for Strength Athletes: What to Add, What to Skip
Most kettlebell work is too generic for strength athletes. Three or four moves that help your squat, deadlift, and press — and the ones that waste time.
6 min read
5/3/1 vs Linear Progression: Which to Run When
Both 5/3/1 and linear progression build strength. The difference is how fast they push you and how long they last. Here's how to choose.
5 min read
How Much Volume Do You Actually Need for Hypertrophy?
MEV, MAV, and MRV sound like jargon, but they describe a real volume curve. Here's what the research suggests about how many sets to do.
5 min read
Understanding RPE: When to Use It, When to Skip It
RPE is a useful autoregulation tool. Here's when it adds value and when percentage-based programming is simpler.
5 min read
Why Your Squat Stalled, and What to Do About It
Squat plateaus almost always have a cause—technical, programming, or recovery. Most are fixable. Here's a diagnostic checklist.
5 min read
How to Pick Your First Strength Program
For beginners, nearly any structured program beats no program. Here's what to look for, and what to ignore, when choosing your first protocol.
5 min read
Progressive Overload Without Adding Weight
Adding weight isn't the only way to drive adaptation. Here are four overload levers to use when the plates stop moving.
5 min read
Reading a Workout Log: Signs of Progress vs Noise
A workout log is only useful if you know how to read it. Here's how to tell genuine progress signals from session-to-session noise.
5 min read
PPL 6-Day vs 4-Day: Recovery Tradeoffs
Push/Pull/Legs can run on 3, 4, 5, or 6 days. The tradeoffs around frequency and recovery are practical, not philosophical.
4 min read
GZCLP Explained in 5 Minutes
GZCLP is one of the most beginner-friendly linear progression programs available. Here's how it works in plain terms.